VCM DIPressor Muzzler Tuner w/ 15 settings to Disable VCM ECO mode Honda & Acura

Description

VCM DIPressor to disable VCM & ECO mode of Honda & Acura 3.5L IVTEC Engine.
Easy installation (Plug & Play).
Easy resistance set-up and no need to unplug to change the resistance.
Made with high quality automotive grade parts.
Solid construction for anti-vibration & anti-moisture.
Supports 15 different resistances from 57 to 280 ohm with combinations of 4 dip-switches.
UniCon is a universal connector that enables DIPressor to work with any vehicle model by converting between 05-06 and 07+. The UniCon cannot work by itself, so it should work with the DIPressors or a VCM muzzler.
Instruction
1. Set the DIP switches as "DIP1 OFF/DIP2 ON/DIP3 ON/DIP4 ON" that makes 82 ohms, then hook the DIPressor up.
Drive a car for a while, you need to use a setting with higher resistance if you see ECO light or VCM is still engaged.
2. Set the DIP switches as "DIP1 ON/DIP2 ON/DIP3 OFF/DIP4 OFF" that makes 85 ohms while an engine is off.
You don't need to unplug the DIPressor. Drive a car for a while to make it sure that no ECO light or VCM is not engaged.
3. Do the step 2 again with one step higher resistance setting (92 ohm, 98 ohm and so on) until no ECO light and no VCM
The DIP switch settings is shown below.
Dip switch settings (4 Dips version)
Dip switch settings (5 Dips version)
Same day shipping if payment is cleared before 1 p.m. (EST).
Models supported by 05-06 Dipressor
2005-2006 Honda Odyssey
2006-2008 Honda Pilot
Models supported by 07+ Dipressor
2007 & later Honda Odyssey
2009
& later
Honda Pilot
2008
& later
Honda Accord
2010
& later
Honda Crosstour
2017
& later
Honda Ridgeline
2013
& later
Acura TLX
2013
& later
Acura MDX
2013
& later
Acura RDX
2013
& later
Acura RDL
2019
& later
Honda Passport