-40%
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)
RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)

RF Microwave Resistive Power Divider 1 to 2 Splitter/Combiner Female SMA (-6dB)

$ 5.27

Availability: 100 in stock
  • Condition: New
  • Material: FR4
  • MPN: N/A
  • Color: Red
  • Number of Ports: 3
  • Brand: Robert's Research & Radios
  • All returns accepted: ReturnsNotAccepted
  • Connector Style: 3-Port
  • Type: Power Divider

    Description

    This RF resistive power divider will allow you to connect multiple outputs to a single input or to combine 2 RF signals into a single output at frequencies ranging from DC to >3 GHz (Performance will be significantly degraded at about 6 GHz). Resistive power dividers are perfect for sharing an LO signal in a vertically integrated mixer setup or for providing an amplified RF input signal to multiple SDRs. Possible setups are shown below:
    *pictures needed*
    Device Specifications:
    RF microwave resistive power 1 to 2 divider (splitter/combiner)
    6dB insertion loss
    50 Ohm grounded coplanar waveguide board traces
    1/2 watt max power rating (made using 1/4 Watt 2012 metric SMD components)
    Board-fitting edge-mount Samtec female SMA connectors
    Tested up to 3GHz with VNA for input/output matching and insertion loss characteristics relative to 50 Ohms (See VNA test setup photos)
    Size: 33x33mm
    3x 3.2mm Diameter Mounting Holes
    SMA connectors soldered by hand to back side of board for strength and durability over simple paste solder connections