PIONEER SPEC-1 Stereo Pre-amp Power card capacitor kit

Description

This is a Pioneer Spec 1 Power card, capacitor kit.
This replacement kit is for card AWR 094-C.
It is on the top end of the Spec 1 as pictured.
Recapping this card solves many nuisance problems
and is very easy to accomplish.
This does not include the transistors.
This is always the first board I recap on the Spec 1.
High quality caps all tracked down for you.
This board takes me 5 minutes to recap,
your actual time will vary depending on experience.
Polarity matters on capacitors.
Make sure you get the --neg side of the cap,
on the --neg side of the board.
I place the soldering iron over both solder spots at once,
then pull the old cap straight out.
Line up the new cap, REMEMBER POLARITY,
heat both solder spots at once and quickly push new cap through.
If done right and quickly, little to no new solder is needed.
If you prefer one at a time with solder removal, that is fine,
but not the way old Pro's do it.