PARASOUND JC-2 HALO PREAMP

Description

Parasound - JC2
Serial # - 79108420112
Halo is Parasound's premium line of audiophile components. Originally designed by John Curl a senior veteran audio designer who worked on many electronics for Jerry Garcia and the Grateful Dead. This is truly a studio grade preamp!
The unit has had very little use, as it was part of an estate. The pictures truly do speak for themselves. We have thoroughly tested this unit, ran audio through it, and listened to the outputs. No manuals or original packing, but we can promise it will be packed thoroughly and safely . Truly a great sounding audiophile preamp, See specs below.
We have noted the RCA barrel on input number 3 is missing, however when plugging left and right input from common source it still operates properly. This is a great preamp for any high end home theater system!
The 19'' rack mount HRA 3 are available directly from Parasound.
ALL SALES ARE FINAL
After purchase you may reach out to add shipping insurance through FedEx
Frequency Response
5 Hz - 100 kHz, +0/-3 dB
Distortion
THD: < 0.003% at 100 Hz
THD: < 0.005% at 20 kHz
IM: < 0.003%
S/N Ratio
> 116 dB, input shorted, IHF A-weighted
> 104 dB, input shorted, unweighted
Crosstalk
> 100 dB at 10 kHz
> 90 dB at 20 kHz
Gain
14 dB, maximum
L, R Gain Control Range
- 10 dB
Input Impedance
Unbalanced: 30k ohms
Balanced: 30k ohms per leg
Output Impedance
Unbalanced: < 60 ohms
Balanced: < 60 ohms per leg
Input Sensitivity
200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
AC Power Requirement
110 - 120 V or 220-240 V, 50 - 60 Hzs
(Set AC Voltage switch on rear panel)
25 watt standby; 30 watts when turned on
Dimensions
Width: 17 1/4" (437 mm)
Depth: 16" (406 mm)
Height, with feet: 5 7/8" (150 mm)
Height, without feet: 5 1/4" (133 mm)
Weight
Net: 24 lbs. (11 kg)
Shipping: 36 lbs. (16.4 kg)