CARVER C-1 Preamp Gold Plated RCA connector Kit *Series II*

Description

RCA connector upgrade Kit for the Carver C-1 pre-amp...
**PREAMP NOT INCLUDED**
This is a One Evening task.
This Kit includes 6 dual and 1 single brand NEW Black Powder Coated Steel plates tooled for use in the C-1 back panel. The RCA connectors fit snugly into place and secured with the provided Black Flathead screws.  A 30" length of Bare ground wire is also provided to help make the short jump from the PCB to the connector pins (since the Pins are NOT as long as needed).
You will reuse the screws that secured the old RCA connectors for attaching the NEW replacement modules.
What is included in the C-1 connector KIT:
6   Tooled Dual back plates
1   Tooled Single back plate
13  Right Angle Gold Plated RCA modules
13  Black Flathead screws
1    Small roll of Ground wire (30")
1    Instruction Sheets with color PICs  (which you probably won't need, but just in case)
NOTE:
You will reuse the original module mounting screws to mount the NEW RCA adapter plates. The original screws are self-threading and you will find it easier to to use them, if you first thread them through the plate on a piece of wood before mounting to the unit's chassis.