2016-2020 Camaro Non Bose Plug N Play Amp Integration Harness by Subthump

Description

Fits: 2016-2020 Camaro Coupe With
Non
Bose Amplifier (horizontal fins)
Provides 4-channel Stereo Output For Adding Additional Amplifiers.
Can also be easily modified and used as a loop back harness for amping the existing car's speakers with an aftermarket amp.
Easy Plug and Play installation.  Anyone can install this device and is done completely from the trunk
A very valuable tool if you intend to do any kind of wiring to the car's audio system.  This will save you lots of time and hassle.
Does
Not
provide 12v switched power for amp turn-on, as there is none present in newer Camaros.
The use of a processor or line converter with signal sensing input is required unless the amp has these built in.
Amp is located in spare tire area on left side close to the rear.  Must have
horizontal
fins like in photo.  Fins running diagonal means bose (requires different harness).  No amp present in that spot means base system in which we have no offering for.
Note: If your car is a 1SS (v8) Non Bose with Active Noise Cancellation,
our ANC Defeat harness will also work.  See related products.
Contains 4 channel blunt cut leads approximately 13" long
Can be extended by user as needed.
Wire Color
Function
purple wires                      right rear channel  solid is+  blk stripe is-
green wires                       left rear channel    solid is+  blk stripe is-
gray wires                         right front channel solid is+  blk stripe is-
white wires                       left front channel   solid is+  blk stripe is-