16 In Heat Resistant Gloves Leather Welding Oven Grill Fireplace Protection Mitt

Description

Usage: In addition to cutting, mig/mma welding, it is also useful for many other work and household tasks, such as work gloves, heat-resistant gloves, gardening gloves, camping gloves, cut-resistant gloves, fireplace gloves, handling gloves, forging protection, etc
Features: The gloves are made of 1.5 mm thick, Kevlar padded leather, moisture-proof, anti-wear, anti-knife-cut, anti-tear, anti-puncture, anti-oil, anti-combustion, anti-heat, anti-fine metal slag, Block radiation, while having certain insulation properties
Safety: 16-inch extra-long gloves with 7.5-inch long sleeves can protect your forearms from grinding debris, cutting sparks, hot coal and open flames, hot kitchen utensils and hot steam. It is recommended for rod welding, Mig welding, flux-cored welding wire, forging or other high temperature applications. Provide the most extreme thermal protection
Material: Made of Double-layer Kevlar padded leather. Inner layer: Kevlar Insulated Cotton with Air-isolated Aluminum Foil. Flame-retardant seam, with high heat resistance and cold resistance, sweat absorption, breathability, no allergies. These gloves are guaranteed to withstand extreme temperatures of 932°F (500°C)
Specification:
The gloves are made of heat-resistant and flame-retardant leather, which can provide very
safe protection when you are welding. The inside of the gloves is cotton lining, soft and
comfortable, can absorb sweat. Sewing with high-strength Kevlar thread, and all seams
are reinforced with leather to prevent tearing or tearing. This material and design can
provide extremely high heat resistance up to 932°F (500°C), and 16-inch ultra-long gloves
can also perfectly protect your hands and forearms from high temperature hazards.
Pay attention to the following points when using gloves:
1. The size of the glove should be appropriate. If the glove is too tight, it will restrict blood
circulation, which will easily cause fatigue and uncomfortable; if it is too loose, it will be
inflexible and easy to fall off. 2. The selected gloves should have adequate protection. These gloves are not meant for
prolonged direct contact to a hot grill grate or hot metal cookware for a long time. (About
15 Secords) 3. Check the gloves at any time to check whether there are small holes or damaged or
abraded places, especially finger joints. For welding gloves, the inflation method can be
used for inspection.
4. Pay attention to safety during use, and don't throw away contaminated gloves arbitrarily
to avoid harm to others. Keep gloves that are not in use in a safe place.